Saad, M.H. and Xue, D., “Optimal Design and Process Planning for Product Adaptation with Initial Evaluation of Solutions Based on Information Entropy,” ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2023), Boston, Massachusetts, USA, 2023 (Accepted).
Deabae, R. and Xue, D., “Robust Design for Product Adaptation Considering Changes in Configurations and Parameters,” ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2023), Boston, Massachusetts, USA, 2023 (Accepted).
Saad, M.H. and Xue, D., “Initial Selection of Configurations Based on Information Entropy for Multi-Level Design Optimization,” Proceedings of the 33th CIRP Design Conference, Sydney, Australia, 2023.
Deabae, R. and Xue, D., “Multi-level Design Optimization Considering Uncertainties in Configurations and Parameters,” Proceedings of the 33th CIRP Design Conference, Sydney, Australia, 2023.
Xue, D. and Imaniyan, D., “A Framework for Optimal Design of Complex Products,” Proceedings of the 28th CIRP Design Conference, Nantes, France, 2018.
Liu, H., Chu, X., and Xue, D., “Simulation-based Evaluation of Product Service Activities in Whole Product Life-cycle Span for Optimal Concurrent Design,” Proceedings of the 13th International Conference on Frontiers of Design and Manufacturing, Jinan, China, 2018.
Gadalla, M. and Xue, D., “Optimal Design of A Reconfigurable Machine Tool Considering Machine Configurations and Configuration Changes,” Proceedings of the 27th CIRP Design Conference, Cranfield, UK, 2017.
Martinez, M. and Xue, D., “Development of Adaptable Products Based on Modular Design and Optimization Methods,” Proceedings of the 26th CIRP Design Conference, Stockholm, Sweden, 2016.
Mehrad, V., Park, S., Xue, D., and P. Gu, “Development of a Software System for Precision Inspection of Freeform Surfaces,” Proceedings of the 4th International Conference on Virtual Machining Process Technology, Vancouver, BC, Canada, 2015.
Mehrad, V., Lasemi, A., Park, S., Xue, D., and Gu, P., “An Integrated Approach for Precision Machining and Inspection of Freeform Surfaces,” Proceedings of the 4th International Conference on Virtual Machining Process Technology, Vancouver, BC, Canada, 2015.
Zhang, J., Xue, D., Gu, P., “An Integrated Framework to Design Architecture, Configurations and Parameters of Adaptable Product with Robust Performance,” Proceedings of the 25th CIRP Design Conference, Haifa, Israel, 2015.
Mehrad, V., Xue, D., and Gu, P., “Modeling and Evaluation of Uncertainties for Freeform Surface Inspection,” Proceeding of the 3rd International Conference on Virtual Machining Process Technology, Calgary, Alberta, Canada, 2014.
Lasemi, A., Xue, D., and Gu, P., “An Integrated Approach for Precision Manufacturing of Sculptured Surfaces,” Proceeding of the 3rd International Conference on Virtual Machining Process Technology, Calgary, Alberta, Canada, 2014.
Zhang, J., Chen, Y.L., Xue, D., and Gu, P., “Robust Adaptable Design of Mechanical Products,” Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA, 2013.
Mehrad, V., Xue, D., and Gu, P., “Robust Localization for Freeform Surface Inspection,” Proceedings of the 2nd International Conference on Virtual Machining Process Technology, Hamilton, Ontario, Canada, 2013.
Lasemi, A., Xue, D., and Gu, P., “Tool Path Re-Planning Considering Geometric Errors and Process-Related Errors in Freeform Surface Machining,” Proceedings of the 2nd International Conference on Virtual Machining Process Technology, Hamilton, Ontario, Canada, 2013.
Han, Y., Chen, Y.L., Gu, P., Zhang, J., Bao, N.S., and Xue, D., “A New Method for Evaluating Product Adaptability Based on Carbon Footprint Calculation,” Proceedings of the 16th International Conference on Mechatronics Technology, Tianjin, China, 2012.
Chen, Y., Han, Y., Zhang, J., Xue, D., Bao, N., and Gu, P., “A New Design Approach for Improving Product Adaptability,” Proceeding of the 10th International Conference on Frontiers of Design and Manufacturing, Chongqing, China, 2012.
Lasemi, L., Xue, D., and Gu, P., “Identification and Compensation of Geometric Errors of 5-axis CNC Machine Tools,” Proceedings of the 1st International Conference on Virtual Machining Process Technology, Montreal, Quebec, Canada, 2012.
Mehrad, V., Xue, D., and Gu, P., “Inspection of Freeform Surfaces Considering Variances of Measurement and Surface Reconstruction Errors,” Proceedings of the 1st International Conference on Virtual Machining Process Technology, Montreal, Quebec, Canada, 2012.
Zhang, J., Xue, D., and Gu, P., “Robust Adaptable Design Considering Changes of Parameter Values in Product Operation Stage,” Proceedings of the 22nd CIRP Design Conference, Bangalore, India, 2012.
Chen, Y., Pang, J., Zhang, J., Xue, D., and Gu, P., “Robust Design of a Dynamic Mechanical System Based on Component Modal Synthesis,” Proceedings of the 22nd CIRP Design Conference, Bangalore, India, 2012.
Sun, G.Z., Zhang, J., Hong, B., Xue, D.Y., and Gu, P.H., “Robust Design with Engineering Models Described by Implicit Mathematical Functions,” Advances in Materials Manufacturing Science and Technology XIV, Materials Science Forum, Vols. 697-698, Proceedings of the 14th International Manufacturing Conference in China, Tianjin, China, 2011, pp. 661-664.
Lasemi, A., Xue, D., and Gu, P., “Integrated Inspection and Tool Path Planning for Manufacturing of Freeform Surfaces,” Proceedings of the 23rd Canadian Congress of Applied Mechanics (CANCAM”11), Vancouver, B.C., Canada, 2011, pp. 841-844.
Mehrad, V., Xue, D., and Gu, P., “Modeling of Uncertainties in Freeform Surface Reconstruction,” Proceedings of the 23rd Canadian Congress of Applied Mechanics (CANCAM”11), Vancouver, B.C., Canada, 2011, pp. 904-907.
Kianimanesh, A., Yang, Q., Freiheit, T., Xue, D., and Park, S.S., “Experimental Study of a Direct Methanol Fuel Cell (DMFC) System,” Proceedings of the 23rd Canadian Congress of Applied Mechanics (CANCAM”11), Vancouver, B.C., Canada, 2011, pp. 239-242.
Man, J., Zhang, L., Chen, Y., Xue, D., and Gu, P., “Identification of the Optimal Design Based on Evaluation of Product Configurations Considering Specific Product Adaptabilities,” Proceedings of the 21st CIRP Design Conference, Daedeok Innopolis, Daejeon, South Korea, 2011, pp. 9-15.
Gu, P., Xue. D., and Chen. Y., “General Adaptable Product Design”, Proceedings of the 20th CIRP Design Conference, Nantes, France, 2010.
Zhang, J., Li, S.P., Bao, N.S., Zhang, G.J., Xue, D.Y., and Gu, P.H., “Robust Design Considering Boundaries of Functional Performance Variation,” Proceedings of the Canadian Society for Mechanical Engineering Forum 2010, Victoria, BC, Canada, 2010.
Lasemi, A., Xue, D., and Gu, P., “Integrated Free-form Surface Inspection and Tool Path Planning,” Proceedings of the 2nd International Conference on Process Machine Interactions, Vancouver, BC, Canada, 2010.
Xue, D., Hua, G., and Gu, P., “Adaptable Design for Creating Changeable Products to Satisfy Changeable Requirements,” Proceedings of the 9th International Conference on Frontiers of Design and Manufacturing, Changsha, China, 2010.
Xue, D., Hua, G., Mehrad, M., and Gu, P., “Optimal Adaptable Design Considering Changes of Requirements, Configurations and Parameters in the Whole Product Life-cycle,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, 2010.
Geng, X., Chu, X., Xue, D., and Zhang, Z., “Prioritizing Engineering Characteristics of Product-service System Using Analytic Network Process and Data Envelopment Analysis,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, 2010.
Zhao, D. and Xue, D., “Performance Comparison of Metamodeling Methods from the Perspective of Sample Quality Merits,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, CA, USA, 2009.
Hong, G., Xue, D. and Tu, Y.L., “Customer-Centric Product Modeling for Rapid Product Identification in One-of-a-Kind Production,” Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, CA, USA, 2009.
Li, W., Tu, Y.L. and Xue, D., “An Efficient Heuristic for Adaptive Production Scheduling and Control in One-of-a-Kind Production Shop Floors,” Proceedings of the Eighth Wuhan International Conference on E-Business, Wuhan, China, 2009.
Li, W., Tu, Y.L., Nault, B.R. and Xue, D., “A State-Space Heuristic for Adaptive Production Control in One-of-a-Kind Production,” Transactions of the North American Manufacturing Research Institution of SME, Greenville, South Carolina, USA, Vol. 37, pp. 483-490, 2009.
Hong, G., Dean, P., Yang, W., Tu, Y.L. and Xue, D., “Identification of the Optimal Design and Its Production Process for One-of-a-Kind Production,” Proceedings of the 2008 International Conference on Advances in Product Development and Reliability, Chendu, China, 2008.
Hong, G., Dean, P., Yang, W., Tu, Y.L. and Xue, D., “Integrated Optimal Product Design and Process Planning for One-of-a-Kind Production,” Proceedings of the ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Brooklyn, New York, 2008.
Zhao, D. and Xue, D., “A Hybrid Relationship Modeling Scheme for Parametric Design Considering Uncertainties,” Proceedings of the ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Brooklyn, New York, 2008.
Yuan, S., Tu, Y.L. and Xue, D., “An Optimal Approach to Selecting Suppliers Based on Customer Satisfaction and Components Consideration,” Proceedings of the Seventh Wuhan International Conference on E-Business, Wuhan, China, 2008.
Yuan, S., Tu, Y.L. and Xue, D., “A Combined DEA and AHP Approach to Evaluating Supplier Involvement,” Proceedings of the Sixth Wuhan International Conference on E-Business, Wuhan, China, 2007.
Zhao, D., Dong, W. and Xue, D., “A Hybrid Model with Mathematical Relations and Neural Network Relations for Optimal Concurrent Design,” Proceedings of the CAD”07 – International CAD Conference and Exhibition, Honolulu, Hawaii, 2007.
Zhao, D., Dong, W. and Xue, D., “Optimal Concurrent Design of a Solid Oxide Fuel Cell System Considering Functional Performance and Production Cost,” Proceedings of the Hydrogen & Fuel Cells 2007 – International Conference and Trade Show, Vancouver, B.C., 2007, pp. 482-493.
Song, H., Xue, D. and Tu, Y.L., “Identification of the Optimal Product Design Considering Three Levels of Customer Requirements in One-of-a-kind Production,” Transactions of NAMRC 35, Michigan, MI, 2007, pp. 209-218.
Li, W., Tu, Y.L., Luo, X.G. and Xue, D., “Adaptive Production Scheduling for One-of-a-kind Production with Mass Customization,” Transactions of NAMRC 35, Michigan, MI, 2007, pp. 41-48.
Tu, Y.L., Xue, D., Song, H.J. and Hong, G., “Computer Aided Lean Production for Mass Customization,” Proceedings of the 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, Toronto, Ontario, 2007, pp. 482-491.
Dean, P.R., Tu, Y.L. and Xue, D., 2007, “An Information System Framework for One-of-a-kind Production,” Proceedings of the 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, Toronto, Ontario, 2007, pp. 463-472.
Li, Y., Xue, D. and Gu, P., “Design for Product Adaptability,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Las Vegas, Nevada, 2007.
Song, H., Xue, D. and Tu, Y.L., “A Customer-driven Approach to One-of-a-kind Product Design,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Las Vegas, Nevada, 2007.
Yuan, S., Tu, Y.L. and Xue, D., “Evaluating Supplier Involvement Using DEA and Piesewise Triangular Fuzzy AHP,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Las Vegas, Nevada, 2007.
Hong, G., Hu, L., Xue, D., Tu, Y. L. and Xiong, Y. L., “Design for Customer Satisfaction in One-of-a-Kind Production Environment,” Proceedings of the ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, USA, 2006.
Dean, P. R., Xue, D., and Tu, Y. L., “Prediction of Manufacturing Resource Requirements for Mass-Customization Production,” Transactions of NAMRI/SME 2006, Milwaukee, Wisconsin, USA, 2006, pp. 71-78.
Li, W., Tu, Y. L., and Xue, D., “Adaptive Production Scheduling and Control for One-of-a-kind Production Shop Floor,” Transactions of NAMRI/SME 2006, Milwaukee, Wisconsin, USA, 2006, pp. 159-166.
Li, X. D., Tu, Y. L., and Xue, D., “Design Candidate Identification for OKP Product Development Based Upon Operational QFD Planning,” Transactions of NAMRI/SME 2006, Milwaukee, Wisconsin, USA, 2006, pp. 167-174.
Xue, D., “Discussion on Design Matrices in Axiomatic Design,” Proceedings of the 16th CIRP International Design Seminar, Kananaskis, Alberta, Canada, 2006, pp. 266-274.
Hong, G., Hu, L., Xue, D., Tu, Y. L., and Xiong, Y. L., “Multi-Objective Optimal Design for One-of-a-Kind Production,” Proceedings of the 16th CIRP International Design Seminar, Kananaskis, Alberta, Canada, 2006, pp. 584-593.
Li, Y., Gu, P., and Xue, D., “Design Process for Product Adaptability: Method and Application,” Proceedings of the 16th CIRP International Design Seminar, Kananaskis, Alberta, Canada, 2006, pp. 448-455.
Li, X. D., Tu, Y. L., Xue, D., and Dong, Y., “Importance Measures for Customer Requirements and Technical Attributes in Fuzzy Environment,” Proceedings of the 17th IASTED International Conference on Modeling and Simulation, Montreal, Quebec, Canada, 2006.
Li, Y., Xue, D, and Gu, P., “Prioritizing Design Candidates in Adaptable Design Using the Grey Relational Analysis Approach,” Proceedings of the Third CDEN/RCCI International Design Conference, Toronto, Ontario, Canada, 2006, pp. 93-101.
Xue, D., Yang, H., and Tu, Y. L., “A Multi-World Mechanism for Modeling Evolutionary Design Process from Conceptual Design to Detailed Design,” Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Vol. 1, Guangzhou, China, 2006, pp. 227-232.
Dong, Y., Dean, P., Tu, Y. L., Xue, D., and Tang, J. F., “Part Design in Supplier Involved One-of-a-Kind Product Development,” Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Vol. 3, Guangzhou, China, 2006, pp. 179-184.
Tu, Y. L., Dean, P., Xue, D., Li, W., and Li, X., “One-of-a-Kind Product Design and Manufacture,” Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Vol. 3, Guangzhou, China, 2006, pp. 185-190.
Hong, G., Hu, L., Xue, D., Tu, Y. L., and Xiong, Y. L., “Identification of the Optimal Product Configuration and Its Parameters for One-of-a-Kind Production,” Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Vol. 3, Guangzhou, China, 2006, pp. 191-196.
Xue, D., Yang, H., and Tu, Y. L., “Modeling of Evolutionary Design Database,” Proceedings of the ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Long Beach, CA, USA, 2005.
Yang, H., Xue, D., and Tu, Y. L., “Modeling of Non-Linear Relations among Different Design Evaluation Measures for Multi-Objective Design Optimization,” Proceedings of the ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Long Beach, CA, USA, 2005.
Wu, H., Ronsky, J. L., Poncet, P., Cheriet, F., Xue, D., Harder, J., and Zernicke, R. F., “Prediction of Scoliosis Progression in Time Series Using a Hybrid Learning Technique,” Proceedings of the 27th Conference of Engineering in Medicine and Biology Society, Shanghai, China, 2005.
Xue, D., Yang, H., and Tu, Y. L., “Design Process Modeling for the Future CAD Systems,” Proceedings of the Second International Conference on Design Education, Innovation, and Practice, Kananaskis, Alberta, Canada, 2005.
Xue, D., “Teaching CAD in Mechanical and Manufacturing Engineering Programs – An Experience at University of Calgary,” Proceedings of the Second International Conference on Design Education, Innovation, and Practice, Kananaskis, Alberta, Canada, 2005.
Xue, D., Cheing, S. Y., and Gu, P., “Design for Project Change Management – Part 1: Configuration Design,” CD-ROM Proceedings of The 2004 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah, 2004.
Xue, D., Cheing, S. Y., and Gu, P., “Design for Project Change Management – Part 2: Attribute Design,” CD-ROM Proceedings of The 2004 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah, 2004.
Xue, D. and Yang, H., “Design Database Modeling for the Future CAD Systems,” CD-ROM Proceedings of the Inaugural CDEN/RCCI Conference, Montreal, 2004.
Xue, D. and Yang, H., “A Concurrent Engineering-Oriented Design Database Representation Model,” CD-ROM Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing,, Xi”an, 2004.
Xue, D., “A++: An Agent-Oriented Programming Language,” Proceedings of the 7th World Multiconference on Systemics, Cybernetics and Informatics, Vol. II, Orlando, FL, 2003, pp. 147-152.
Wu, H., Xue, D., Harder, J., Ronsky, J. L., Poncet, P., Jaremko, J., Clynch, G., Gyorffy, A., and Zernicke, R. F., “Design and Manufacturing of Customized Braces for Scoliosis Treatment,” CD-ROM Proceedings of The 2002 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Quebec, 2002.
Xue, D. and Zhang, F., “Distributed and Optimal Concurrent Design Modeling,” Proceedings of The 5th International Conference on Frontiers of Design and Manufacturing, Dalian, Vol. 1, 2002, pp. 114-119.
Xue, D. and Xu, Y., “Web-based Design and Manufacturing Modeling,” Proceedings of The 5th International Conference on Frontiers of Design and Manufacturing, Dalian, Vol. 1, 2002, pp. 225-230.
Zhang, F. and Xue, D., “Optimal Concurrent Design Based upon Distributed Database and Knowledge Base Modeling,” CD-ROM Proceedings of The 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, 2001.
Wang, H. and Xue, D., “An Intelligent Zone-based Delivery Scheduling Approach,” CD-ROM Proceedings of The 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, 2001.
Xue, D. and Xu, Y., “Web-based Distributed System and Database Modeling for Concurrent Design,” CD-ROM Proceedings of The 2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, 2001.
Xue, D. and Xu, Y., “Web-based Concurrent Design Using a Distributed System and Database Modeling Approach,” Proceedings of The Sixth International Conference on Computer Supported Cooperative Work in Design, London, Ontario, 2001, pp. 267-272.
Zhang, F. and Xue, D., “An Optimal Concurrent Design Model Using Distributed Product Development Life-cycle Databases,” Proceedings of The Sixth International Conference on Computer Supported Cooperative Work in Design, London, Ontario, 2001, pp. 273-278.
Zhang, F. and Xue, D., “Distributed Database and Knowledge Base Modeling for Concurrent Design,” CD-ROM Proceedings of the 2000 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, Maryland, 2000.
Sun, J., Xue, D., and Norrie, D. H., “An Intelligent Manufacturing System for Predictive and Reactive Scheduling,” CD-ROM Proceedings of the 2000 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, Maryland, 2000.
Wang, H., Xue, D., and Norrie, D. H., “A Fuzzy-based Optimal Delivery Scheduling Approach,” CD-ROM Proceedings of the 2000 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, Maryland, 2000.
Zhang, F. and Xue, D., “Internet-based Database and Knowledge Base Modeling for Computer-aided Concurrent Design,” Proceedings of the 4th International Conference on Frontiers of Design and Manufacturing, Hangzhou, 2000, pp. 454-459.
Sun, J. and Xue, D., “Development of an Intelligent System for Predictive and Reactive Scheduling,” Proceedings of the 4th International Conference on Frontiers of Design and Manufacturing, Hangzhou, 2000, pp. 65-70.
Xue, D., “Further Development on Integrated and Intelligent Concurrent Design,” CD-ROM Proceedings of the 2000 NSF Design & Manufacturing Research Conference, Vancouver, B.C., 2000.
Yadav, S., Xu, Y., and Xue, D., “A Multi-level Heuristic Search Algorithm for Production Scheduling,” CD-ROM Proceedings of ASME 1999 Design Engineering Technical Conferences and Computers in Engineering Conference, Las Vegas, Nevada, 1999.
Sun, J., Kalenchuk, D. K., Xue, D., and Gu, P., “Neural Network-based Fuzzy Reasoning for Conceptual Design Evaluation,” CD-ROM Proceedings of ASME 1999 Design Engineering Technical Conferences and Computers in Engineering Conference, Las Vegas, Nevada, 1999.
Xue, D., Yadav, S., and Norrie, D. H., “Development of an Intelligent System for Building Product Design and Manufacturing – Part I: Product Modeling and Design,” Proceedings of the Second International Workshop on Intelligent Manufacturing Systems 1999, Leuven, 1999, pp. 367-376.
Xue, D., Sun, J., and Norrie, D. H., “Development of an Intelligent System for Building Product Design and Manufacturing – Part II: Production Process Planning and Scheduling,” Proceedings of the Second International Workshop on Intelligent Manufacturing Systems 1999, Leuven, 1999, pp. 57-66.
Sun, J., Xue, D., and Norrie, D. H., “An Intelligent Production Scheduling Mechanism Considering Design and Manufacturing Constraints,” Proceedings of The Third International Conference on Industrial Automation, Montreal, 1999, pp. 24.11-24.14.
Xue, D., “Modeling of Product Life-cycle Knowledge and Data for an Intelligent Concurrent Design Systems,” Proceedings of The Third IFIP Working Group 5.2 Workshop on Knowledge Intensive CAD, Tokyo, 1998, pp. 71-93.
Xue, D., “Intelligent Scheduling for Product Distribution,” CD-ROM Proceedings of 1998 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, 1998.
Yadav, S. and Xue, D., “A Multi-level Production Scheduling Mechanism,” Proceedings of the Sixth IASTED International Conference on Robotics and Manufacturing, Banff, 1998, pp. 169-172.
Xue, D., “An Integrated and Intelligent Product Realization Process Model for Improving Manufacturability,”” Proceedings of Young Scientists Conference on Manufacturing Science , Wuhan, 1998, pp. 308-313.
Yadav, S. and Xue, D., “Feature-based Concurrent Design for Improving Manufacturability,” Proceedings of CSME Forum 1998, Vol. 3, Toronto, 1998, pp. 7-14.
Shen, W., Xue, D., and Norrie, D. H., “An Agent-based Manufacturing Enterprise Infrastructure for Distributed Integrated Intelligent Manufacturing Systems,” Proceedings of The Third International Conference on the Practical Application of Intelligent Agents and Multi-agents, London, 1998, pp. 533-548.
Xue, D. and Dong, Z., “Optimal Fuel Cell System Design Considering Functional Performance and Production Costs,” CD-ROM Proceedings of 1997 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, CA, 1997.
Dong, Z. and Xue, D., “Intelligent Scheduling of Contraflow Traffic Control Operation Using Hierarchical Pattern Recognition and Constrained Optimization,” Proceedings of 1997 IEEE International Conference on Systems, Man, and Cybernetics , Orlando, FL, 1997, pp. 135-140.
Xue, D., “Identification of the Optimal Product Configuration and Parameters for Improving Manufacturability,” CD-ROM Proceedings of 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, CA, 1996.
Xue, D. and Dong, Z., “Agent-based Knowledge Base and Database Representation for Integrated Concurrent Design,” Proceedings of International Workshop on CSCW in Design, Beijing, 1996, pp. 1-10.
Xue, D., Rousseau, J. H., and Dong, Z., “Joint Optimization of Functional Performance and Production Costs Based upon Mechanical Features and Tolerances,” Proceedings of the ASME 1995 Design Engineering Technical Conferences, DE-Vol. 83, ASME, Boston, MA, 1995, pp. 1013-1028.
Dong, Z., Xue, D., and Rousseau, J. H., “Feature-based Concurrent Engineering Design for the Next Generation CAD Systems,” Proceedings of the Fourth International Conference on CAD/CG, Wuhan, 1995, pp. 489-498.
Xue, D. and Dong, Z., “Integrated Concurrent Design Using a Feature-based Quantitative Intelligent System,” Proceedings of the 15th Canadian Congress of Applied Mechanics CANCAM95, 1995, pp. 706-707.
Xue, D. and Dong, Z., “Coding and Clustering of Design and Manufacturing Features for Concurrent Design,” Proceedings of 1994 ASME Design Automation Conference: Advances in Design Automation 1994, DE-Vol. 69-1, ASME, Minneapolis, Minnesota, 1994, pp. 533-545.
Xue, D. and Dong, Z., “Automated Concurrent Design Based on Combined Feature, Tolerance, Production Process and Cost Models,” Proceedings of 1993 ASME Design Automation Conference: Advances in Design Automation, DE-Vol. 65-2, ASME, Albuquerque, NM, 1993, pp. 199-210.
Xue, D. and Dong, Z., “A Quantitative Intelligent System for Concurrent Design,” Proceedings of the Second IEEE Conference on Control Applications, IEEE, Vancouver, 1993, pp. 681-686.
Xue, D. and Dong, Z., “Object Oriented Knowledge Representation and Its Applications in Concurrent Design,” Proceedings of the IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, IEEE, Victoria, 1993, pp. 638-641.
Xue, D., Ishii, M., Tomiyama, T., and Yoshikawa, H., “The Development of a Design Knowledge Representation Language – IDDL (5th Report): Design with IIICAD System,” Proceedings of JSPE 1992 Spring Conference, JSPE, Tokyo, Japan, 1992, pp. 109-110.
Xue, D., Kiriyama, T., Takeda, H., Tomiyama, T., and Yoshikawa, H., “An Experience of Developing Intelligent CAD Systems,” Proceedings of the 9th Symposium on Design, JSPE, Tokyo, Japan, 1991, pp. 59-68.
Ishii, M., Xue, D., Tomiyama, T., and Yoshikawa, H., “The Development of a Design Knowledge Representation Language – IDDL (4th Report): The Development of IIICAD with IDDL,” Proceedings of JSPE 1991 Autumn Conference, JSPE, Hamamatu, Japan, 1991, pp. 485-486.
Xue, D., Tomiyama, T., and Yoshikawa, H., “The Development of a Design Knowledge Representation Language – IDDL (3rd Report): The Extended Specifications,” Proceedings of JSPE 1991 Spring Conference, JSPE, Tokyo, Japan, 1991, pp. 23-24.
Umeda, Y., Xue, D., Kiriyama, T., Tomiyama, T., and Yoshikawa, H., “A Diagnosis System Developed on Smalltalk-80 – the Application of Smalltalk-80,” Proceedings of 1st Symposium on the Application of Smalltalk-80, Fuji Xerox Company, Tokyo, Japan, 1990, pp. 40-51.
Veerkamp, P. J., Kiriyama, T., Xue, D., and Tomiyama, T., “Representation and Implementation of Design Knowledge for Intelligent CAD: Theoretical Aspect,” Intelligent CAD Systems 4: The Added Value of Intelligence, Proceedings of the 4th EuroGraphics Workshop on Intelligent CAD Systems, El Dahshan, K. and Barthes, J. P. (eds.), Compiegne, France, 1990.
Xue, D., Kiriyama, T., Veerkamp, P. J., and Tomiyama, T., “Representation and Implementation of Design Knowledge for Intelligent CAD: Implementational Aspect,” Intelligent CAD Systems 4: The Added Value of Intelligence, Proceedings of the 4th EuroGraphics Workshop on Intelligent CAD Systems, El Dahshan, K. and Barthes, J. P. (eds.), Compiegne, France, 1990.
Cao, H., Xue, D., Tomiyama, T., and Yoshikawa, H., “The Development of Feature Extraction System based on the Combination of Design Knowledge Representation Language IDDL and Geometric Modeler,” Proceedings of JSPE 1989 Autumn Conference, JSPE, Osaka, Japan, 1989, pp. 561-562.
Ishida, Y., Xue, D., Tomiyama, T., and Yoshikawa, H., “The Construction of a User Interface System based on Conceptual Operations,” Proceedings of JSPE 1989 Autumn Conference, JSPE, Osaka, Japan, 1989, pp. 567-568.
Xue, D., Ishida, Y., Tomiyama, T., and Yoshikawa, H, “Implementation and Application of a Design Knowledge Representation Language,” Proceedings of IFIP WG 5.2. Workshop on Intelligent CAD, IFIP, Osaka, Japan, 1989, pp. 478-497.
Takeda, H., Hayashi, N., Xue, D., Tomiyama, T., and Yoshikawa, H., “Design Simulation for Intelligent CAD,” Proceedings of the 7th Symposium on Design, JSPE, Tokyo, Japan, 1989, pp. 34-36.
Xue, D., Tomiyama, T., and Yoshikawa, H., “The Development of a Design Knowledge Representation Language – IDDL (2nd Report): The Development of a Prototype System,” Proceedings of JSPE 1989 Spring Conference, JSPE, Chiba, Japan, 1989, pp. 39-40.
Tomiyama, T., Xue, D., and Yoshikawa, H., “The Development of a Design Knowledge Representation Language – IDDL (1st Report): The Language Specifications,” Proceedings of JSPE 1989 Spring Conference, JSPE, Chiba, Japan, 1989, pp. 37-38.
