{"id":171,"date":"2023-06-27T17:08:04","date_gmt":"2023-06-27T23:08:04","guid":{"rendered":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/?page_id=171"},"modified":"2025-10-23T10:56:52","modified_gmt":"2025-10-23T16:56:52","slug":"journal-publications","status":"publish","type":"page","link":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/journal-publications\/","title":{"rendered":"Journal Publications"},"content":{"rendered":"\n

Saad, M. and Xue, D., \u201cEvaluation of General Product Adaptability for Adaptable Product Design,\u201d Journal of Mechanical Design, ASME Transactions<\/em>, 2025 (Accepted).<\/p>\n\n\n\n

Saad, M. and Xue, D., \u201cIdentification of the Optimal Original Design Configuration, Adapted Design Configuration, and Product Adaptation Process for Design of New Adaptable Product,\u201d Journal of Engineering Design<\/em>, 2025 (Accepted).<\/p>\n\n\n\n

Deabae, R. and Xue, D., \u201cRobust Design for Product Adaptation Considering Changes in Configurations and Parameters,\u201d Journal of Mechanical Design, ASME Transactions<\/em>, Vol. 147, No. 2, 2025.<\/p>\n\n\n\n

Saad, M. and Xue, D., \u201cOptimization to Identify the Adapted Product Design and Product Adaptation Process with Initial Evaluation of Information Quality in Branches of AND-OR Tree Based on Information Entropy,\u201d Advanced Engineering Informatics<\/em>, Vol. 62, Part A, 2024.<\/p>\n\n\n\n

Yang, Q., Zhang, Z., Xiao, G. and Xue, D., \u201cHydrophobicity Gradient Optimization of Fuel Cell Gas Diffusion Media for Its Application in Vehicles,\u201d Fundamental Research<\/em>, Vol. 4, No. 5, 2024, pp. 1036-1046.<\/p>\n\n\n\n

Wang, Z., Zeng, T., Chu, X. and Xue, D., “Multi-objective Deep Reinforcement Learning for Optimal Design of Wind Turbine Blade,” Renewable Energy, Vol. 203, 2023, pp. 854-869.<\/p>\n\n\n\n

Gadalla, M, and Xue, D., “An Efficient Optimisation Method Based on Weighted AND-OR Trees for Concurrent Reconfigurable Product Design and Reconfiguration Process Planning,” International Journal of Production Research, Vol. 61, No. 3, 2023, pp. 859-879.<\/p>\n\n\n\n

Wang, C., Zhang, C., Cheng, Q., Zhang, T., Shi, W. and Xue, D., “Kinematic Modeling of a Planetary Roller Screw Mechanism Considering Runout Errors and Elastic Deformation,” International Journal of Advanced Manufacturing Technology, Vol. 124, 2023, pp. 4455-4463.<\/p>\n\n\n\n

Li, S., Tang, D., Xue, D., Wang, Q. and Zhu, H., “Assembly Sequence Planning Based on Structure Cells in Open Design,” Advanced Engineering Informatics, Vol. 53, 2022, Article 101685.<\/p>\n\n\n\n

Yu, B., Zhu, H., Xue, D., Xu, L., Zhang, S. and Li, B., “A Dead Reckoning Calibration Scheme Based on Optimization with an Adaptive Quantum-Inspired Evolutionary Algorithm for Vehicle Self-Localization,” Entropy, Vol. 24, No. 8, 2022, Article 1128.<\/p>\n\n\n\n

Xue, D. and Imaniyan, D., “An Integrated Framework for Optimal Design of Complex Mechanical Products,” Journal of Computing and Information Science in Engineering, ASME Transactions, Vol. 21, No. 4, 2021.<\/p>\n\n\n\n

Chen, X., Wang, P., Dong, H., Zhao, X. and Xue, D., “Coupled-analysis Assisted Gradient-enhanced Kriging Method for Global Multidisciplinary Design Optimization,” Engineering Optimization, Vol. 53, No. 6, 2021, pp. 1081-1100.<\/p>\n\n\n\n

Chen, H.S., Liu, H., Chu, X.N., Liu, Q., and Xue, D., “Anomaly Detection and Critical SCADA Parameters Identification for Wind Turbines Based on LSTM-AE Neural network,” Renewable Energy, Vol. 172, 2021, pp. 829-840.<\/p>\n\n\n\n

Zhang, J., Du, H., Xue, D., and Gu, P., “Robust Design Approach to Minimization of Functional Performance Variations of Products and Systems,” Frontiers of Mechanical Engineering, Vol. 16, No. 2, 2021, pp. 379-392.<\/p>\n\n\n\n

Chen, H.S., Ma, H.Z., Chu, X.N. and Xue, D., “Anomaly Detection and Critical Attributes Identification for Products with Multiple Operating Conditions Based on Isolation Forest,” Advanced Engineering Informatics, Vol. 46, 2020.<\/p>\n\n\n\n

Gadalla, M. and Xue, D., “An Extended Analytic Network Process Method for Optimal Design of Reconfigurable Products Considering Dependency Relations Among Descriptions of Design\/Process Candidates and Evaluation Criteria,” Journal of Mechanical Engineering Science, Vol. 234, No. 24, 2020, pp. 4763-4779.<\/p>\n\n\n\n

Liu, Z., Yan, J., Cheng, Q., Yang, C. and Xue, D., “The Mixed Production Mode Considering Continuous and Intermittent Processing for an Energy-Efficient Hybrid Flow Shop Scheduling,” Journal of Cleaner Production, Vol. 246, 2020.<\/p>\n\n\n\n

Liu, H., Chu, X. and Xue, D., “An Optimal Concurrent Product Design and Service Planning Approach through Simulation-Based Evaluation Considering the Whole Product Life-Cycle Span,” Computers in Industry, Vol. 111, 2019, pp. 187-197.<\/p>\n\n\n\n

Huo, G., Jiang, X., Zheng, Z. and Xue, D., “A Sequential Sampling Method for Adaptive Metamodeling Using Data with Highly Nonlinear Relation between Input and Output Parameters,” Engineering Computations, Vol. 37, No. 3, 2019, pp. 953-979.<\/p>\n\n\n\n

Huo, G., Jiang, X., Su, C., Lu, Z., Sun, Y., Zheng, Z. and Xue, “CNC Tool Path Generation for Freeform Surface Machining Based on Preferred Feed Direction Field,” International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 5, 2019, pp. 777-790.<\/p>\n\n\n\n

Ma, H., Chu, X., Wang, W., Liu, X. and Xue, D., “A Directed Failure Causality Network (DFCN) Based Method for Function Components Risk Prioritization Under Interval Type-2 Fuzzy Environment,” Advanced Engineering Informatics, Vol. 41, 2019, Article 100920.<\/p>\n\n\n\n

Cheng, Q., Qi, B., Liu, Z., Zhang, C. and Xue, D., “An Accuracy Degradation Analysis of Ball Screw Mechanism Considering Time-Varying Motion and Loading Working Conditions,” Mechanism and Machine Theory, Vol. 134, 2019, pp. 1-23.<\/p>\n\n\n\n

Ma, H., Chu, X., Xue, D. and Chen, D., “Identification of To-Be-Improved Components for Redesign of Complex Products and Systems Based on Fuzzy QFD and FMEA,” Journal of Intelligent Manufacturing, Vol. 30, No. 2, 2019, pp. 623-639.<\/p>\n\n\n\n

Zhang, L., Chu, X., and Xue, D., “Identification of the To-be-Improved Product Features Based on Online Reviews for Product Redesign,” International Journal of Production Research, Vol. 57, No. 8, 2019, pp. 2464-2479.<\/p>\n\n\n\n

Yu, B., Dong, L., Xue, D., Zhu, H., Geng, X., Huang, R. and Wang, J. “A Hybrid Dead Reckoning Error Correction Scheme Based on Extend Kalman Filter and Map Matching for Vehicle Self-localization,” Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, Vol. 23, No. 1, 2019, pp. 84-98.<\/p>\n\n\n\n

Gadalla, M. and Xue, D., “An Approach to Identify the Optimal Configurations and Reconfiguration Processes for Design of Reconfigurable Machine Tools,” International Journal of Production Research, Vol. 56, No. 11, 2018, pp. 3880-3900.<\/p>\n\n\n\n

Martinez, M. and Xue, D., “A Modular Design Approach for Modeling and Optimization of Adaptable Products Considering the Whole Product Life-Cycle Spans,” Journal of Mechanical Engineering Science, Vol. 232, No. 7, 2018, pp. 1146-1164.<\/p>\n\n\n\n

Zeng, B., Quan, L., Tong, J., Ye, J. and Xue, D., “A New Approach Based on Central Composite Design and Multi-Objective Optimization for Design of a Roller-Mill Mechanism in a Maize Stubble Harvester,” International Journal of Advanced Manufacturing Technology, Vol. 91, No. 9-12, 2018, pp. 4329-4342.<\/p>\n\n\n\n

Zhang, L., Chen, H., Chu, X. and Xue, D. “Identification of Performance Requirements for Design of Smartphones Based on Analysis of the Collected Operating Data,” Journal of Mechanical Design, ASME Transactions, Vol. 139, No. 11, 2017.<\/p>\n\n\n\n

Ma, H., Chu, X., Lyu, G. and Xue, D., “An Integrated Approach for Design Improvement Based on Analysis of Time-Dependent Product Usage Data,” Journal of Mechanical Design, ASME Transactions, Vol. 139, No. 11, 2017.<\/p>\n\n\n\n

Cheng, Q., Li, W., Xue, D., Liu, Z., Gu, P., and Li, K., “Design of Adaptable Product Platform for Heavy-Duty Gantry Milling Machines Based on Sensitivity Design Structure Matrix,” Journal of Mechanical Engineering Science, Vol. 231, No. 24, 2017, pp. 4495-4511.<\/p>\n\n\n\n

Ma, H., Chu, X., Xue, D. and Chen, D., “A Systematic Decision Making Approach for Product Conceptual Design Based on Fuzzy Morphological Matrix,” Expert Systems With Applications, Vol. 81, 2017, pp. 444-456.<\/p>\n\n\n\n

Li, Y., Wang, Z., Zhang, L., Chu, X. and Xue, D., “Function Module Partition for Complex Products and Systems Based on Weighted and Directed Complex Networks,” Journal of Mechanical Design, Vol. 139, No. 2, 2017.<\/p>\n\n\n\n

Gadalla, M. and Xue, D., “Recent Advances in Research on Reconfigurable Machine Tools: A Literature Review,” International Journal of Production Research, Vol. 55, No. 5, 2017, pp. 1440-1454.<\/p>\n\n\n\n

Lyu, G., Chu, X. and Xue, D., “Product Modeling from Knowledge, Distributed Computing and Lifecycle Perspectives: A Literature Review,” Computers in Industry, Vol. 84, 2017, pp. 1-13.<\/p>\n\n\n\n

Yu, B., Zhao, H., and Xue, D., “A Multi-Population Co-Evolutionary Genetic Programming Approach for Optimal Mass Customization Production,” International Journal of Production Research, Vol. 55, No. 3, 2017, pp. 621-641.<\/p>\n\n\n\n

Chu, D., Chu, X., Li, Y., Lyu, G. and Xue, D., “A Multi-Skeleton Modeling Approach Based on Top-Down Design and Modular Product Design for Development of Complex Product Layouts,” Journal of Engineering Design, Vol. 27, No. 10, 2016, pp. 725-750.<\/p>\n\n\n\n

Lasemi, A., Xue, D., and Gu, P., “Accurate Identification and Compensation of Geometric Errors of 5-Axis CNC Machine Tools Using Double Ball Bar,” Measurement Science and Technology, Vol. 27, No. 5, 2016.<\/p>\n\n\n\n

Yang, Q. and Xue, D., “A Weighted Sequential Sampling Method Considering Influences of Sample Qualities in Input and Output Parameter Spaces for Global Optimization,” Journal of Optimization Theory and Applications, Vol. 146, No. 2, 2015, pp. 644-665.<\/p>\n\n\n\n

Yang, Q. and Xue, D., “Comparative Study on Influencing Factors in Adaptive Metamodeling,” Engineering with Computers, Vol. 31, No. 3, 2015, pp. 561-577.<\/p>\n\n\n\n

Zhang, J., Xue, D., and Gu, P., “Adaptable Design of Open Architecture Products with Robust Performance,” Journal of Engineering Design, Vol. 26, Nos. 1-3, 2015, pp. 1-23.<\/p>\n\n\n\n

Mehrad, V., Xue, D., and Gu, P., “Robust Localization to Align Measured Points on Manufactured Surface with Design Surface for Freeform Surface Inspection,” Computer-aided Design, Vol. 53, 2014, pp. 90-103.<\/p>\n\n\n\n

Zhang, J., Chen, Y., Xue, D., and Gu, P., “Robust Design of Configurations and Parameters of Adaptable Products,” Frontiers of Mechanical Engineering, Vol. 9, No. 1, 2014, pp. 1-14.<\/p>\n\n\n\n

Lasemi, A., Xue, D., Gu, P., “Tool Path Re-planning in Freeform Surface Machining for Compensation of Process-Related Errors,” International Journal of Production Research, Vol. 52, No. 20, 2014, pp. 5913-5931.<\/p>\n\n\n\n

Zhang, J., Xue, D., and Gu, P., “Robust Adaptable Design Considering Changes of Requirements and Parameters During Product Operation Stage,” International Journal of Advanced Manufacturing Technology, Vol. 72, Nos. 1-4, 2014, pp. 387-401.<\/p>\n\n\n\n

Kianimanesh, A., Yang, Q., Park, S.S., Xue, D., and Freiheit, T., “Model for the Degradation Performance of a Single-Cell Direct Methanol Fuel Cell under Varying Operational Conditions,” Fuel Cells, Vol. 13, No. 6, 2013, pp. 1005-1017.<\/p>\n\n\n\n

Mehrad, V., Xue, D., and Gu, P., “Inspection of Freeform Surfaces Considering Uncertainties in Measurement, Localization and Surface Reconstruction,” Measurement Science and Technology, Vol. 24, No. 8, 2013.<\/p>\n\n\n\n

Yu, B., Yang, Q., Kianimanesh, A., Freiheit, T., Park, S.S., Zhao, H., and Xue, D., “A CFD Model with Semi-empirical Electrochemical Relationships to Study the Influence of Geometric and Operating Parameters on DMFC Performance,” International Journal of Hydrogen Energy, Vol. 38, No. 23, 2013, pp. 9873-9885.<\/p>\n\n\n\n

Mehrad, V., Xue, D., and Gu, P., “Prediction of Surface Reconstruction Uncertainties for Freeform Surface Inspection,” Measurement, Vol. 46, No. 8, 2013, pp. 2682-2694.<\/p>\n\n\n\n

Kianimanesh, A, Yu, B., Yang, Q., Freiheit, T., Xue, D., and Park, S.S., “Investigation of Bipolar Plate Geometry on Direct Methanol Fuel Cell Performance,” International Journal of Hydrogen Energy, Vol. 37, No. 23, 2012, pp. 18403-18411.<\/p>\n\n\n\n

Lasemi, A., Xue, D., and Gu, P., “A Freeform Surface Manufacturing Approach by Integration of Inspection and Tool Path Generation,” International Journal of Production Research, Vol. 50, No. 23, 2012, pp. 6709-6725.<\/p>\n\n\n\n

Chu, X.N., Tang, C.S., Xue, D.Y., Su, Y.L, and Sun, X.W., “Identification of Machining Features Based on Available Resources of Cutting Tools,” International Journal of Production Research, Vol. 50, No. 15, 2012, pp. 4144-4157.<\/p>\n\n\n\n

Visser, D., Xue, D., Ronsky, J.L., Harder, J., and Zernicke, R.F., “Computer-aided Optimal Design of Custom Scoliosis Braces Considering Clinical and Patient Evaluations,” Computer Methods and Programs in Biomedicine, Vol. 107, No. 3, 2012, pp. 478-489.<\/p>\n\n\n\n

Sun, X., Chu, X., Xue, D., Su, Y., and Tang, C.,”An Integrated Setup\/Fixture Planning Approach for Machining Prismatic Parts,” International Journal of Production Research, Vol. 50, No. 4, 2012, pp. 1009-1027.<\/p>\n\n\n\n

Xue, D., Hua, G., Mehrad, V., and Gu, P., “Optimal Adaptable Design for Creating the Changeable Product Based on Changeable Requirements Considering the Whole Product Life-cycle,” Journal of Manufacturing Systems, Vol. 31, No. 1, 2012, pp. 59-68.<\/p>\n\n\n\n

Lu, B., Zhang, J., Xue, D., and Gu, P., “Systematic Lifecycle Design for Sustainable Product Development,” Concurrent Engineering: Research and Applications, Vol. 19, No. 4, 2011, pp. 307-323.<\/p>\n\n\n\n

Yang, Q., Kianimanesh, A., Park, S.S., Freiheit, T., and Xue, D., “A Semi-empirical Model Considering the Influence of Operating Parameters on Performance for a Direct Methanol Fuel Cell,” Journal of Power Sources, Vol. 196, No. 24, 2011, pp. 10640-10651.<\/p>\n\n\n\n

Zhao, D. and Xue, D., “A Multi-Surrogate Approximation Method for Metamodeling,” Engineering with Computers, Vol. 27, No. 2, 2011, pp. 139-153.<\/p>\n\n\n\n

Cao, Q., Xue, D., Zhao, J., and Li, Y., “A Cutting Force Model Considering Influence of Radius of Curvature for Sculptured Surface Machining,” International Journal of Advanced Manufacturing Technology, Vol. 54, Nos. 5-8, 2011, pp. 821-835.<\/p>\n\n\n\n

Geng, X., Chu, X., Xue, D., and Zhang, Z., “A Systematic Decision-making Approach for the Optimal Product-service System Planning,” Expert Systems with Applications, Vol. 38, No. 9, 2011, pp. 11849-11858.<\/p>\n\n\n\n

Li, W., Luo, X., Xue, D., and Tu, Y.L., “A Heuristic for Adaptive Production Scheduling and Control in Flow Shop Production,” International Journal of Production Research, Vol. 49, No. 11, 2011, pp. 3151-3170.<\/p>\n\n\n\n

Li, W., Nault, B.R., Xue, D., and Tu, Y.L., ” An Efficient Heuristic for Adaptive Production Scheduling and Control in One-of-a-kind Production,” Computers & Operations Research, Vol. 38, No. 1, 2011, pp. 267-276.<\/p>\n\n\n\n

Luo, X., Li, W., Tu, Y.L., Xue, D., and Tang, J.F., “Operator Allocation Planning for Reconfigurable Production Line in One-of-a-Kind Production,” International Journal of Production Research, Vol. 49, No. 3, 2011, pp. 689-705.<\/p>\n\n\n\n

Wu, H., Ronsky, J.L., Cheriet, F., Kupper, J.C., Harder, J., Xue, D., and Zernicke, R.F., “Prediction of Scoliosis Progression with Serial Three-Dimensional Spinal Curves and the Artificial Progression Surface Technique,” Medical & Biological Engineering & Computing, Vol. 48, No. 11, 2010, pp. 1065-1075.<\/p>\n\n\n\n

Zhao, D. and Xue, D., “A Comparative Study of Metamodeling Methods Considering Sample Quality Merits,” Structural and Multidisciplinary Optimization, Vol. 42, No. 6, 2010, pp. 923-938.<\/p>\n\n\n\n

Hong, G., Dean, P., Yang, W., Tu, Y.L., and Xue, D., “Optimal Concurrent Product Design and Process Planning Based on Requirements of Individual Customers in One-of-a-Kind Production,” International Journal of Production Research, Vol. 48, No. 21, 2010, pp. 6341-6366.<\/p>\n\n\n\n

Lasemi, A., Xue, D. and Gu, P., “Recent Development in CNC Machining of Freeform Surfaces: A State-of-the-Art Review,” Computer-aided Design, Vol. 42, No. 7, 2010, pp. 641-654.<\/p>\n\n\n\n

Zhang, J., Li, S.P., Bao, N.S., Zhang, G.J., Xue, D.Y. and Gu, P.H., “A Robust Design Approach to Determination of Tolerances of Mechanical Products,” CIRP Annuals – Manufacturing Technology, Vol. 59, 2010, pp. 195-198.<\/p>\n\n\n\n

Zhao, D. and Xue, D., “Parametric Design with Neural Network Relationships and Fuzzy Relationships Considering Uncertainties,” Computers in Industry, Vol. 61, No. 3, 2010, pp. 287-296.<\/p>\n\n\n\n

Hong, G., Xue, D., and Tu, Y.L., “Rapid Identification of the Optimal Product Configuration and Its Parameters Based on Customer-Centric Product Modeling for One-of-a-Kind Production,” Computers in Industry, Vol. 61, No. 3, 2010, pp. 270-279.<\/p>\n\n\n\n

Luo, X., Li, W., Tu, Y.L., Xue, D., and Tang, J.F., “Optimal Resource Allocation for Hybrid Flow Shop in One-of-a-kind Production” International Journal of Computer Integrated Manufacturing, Vol. 23, No. 2, 2010, pp. 146-154.<\/p>\n\n\n\n

Geng, X., Chu, X., Xue, D., and Zhang, Z., “An Integrated Approach for Rating Engineering Characteristics” Final Importance in Product-Service System Development,” Computers & Industrial Engineering, Vol. 59, No. 4, 2010, pp. 585-594.<\/p>\n\n\n\n

Gu, P., Xue, D. and Nee, A.Y.C., “Adaptable Design: Concepts, Methods and Applications,” Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 223, No. 11, 2009, pp. 1367-1387.<\/p>\n\n\n\n

Dean, P.R., Xue, D. and Tu, Y.L., “Prediction of Manufacturing Resource Requirements from Customer Demands in Mass-Customization Production,” International Journal of Production Research, Vol. 47, No. 5, 2009, pp. 1245-1268.<\/p>\n\n\n\n

Dean, P.R., Tu, Y.L. and Xue, D., “An Information System for One-of-a-kind Production,” International Journal of Production Research, 47, No. 4, 2009, pp. 1071-1087.<\/p>\n\n\n\n

Zhao, D., Dong, W., and Xue, D., “A Hybrid Model for Optimal Concurrent Design of Solid Oxide Fuel Cell System Considering Functional Performance and Production Cost,” Concurrent Engineering: Research and Applications, Vol. 16, No. 2, 2008, pp. 161-172.<\/p>\n\n\n\n

Li, Y., Xue, D. and Gu, P., “Design for Product Adaptability,” Concurrent Engineering: Research and Applications, Vol. 16, No. 3, 2008, pp. 221-232.<\/p>\n\n\n\n

Yuan, S., Tu, Y.L., and Xue, D., “Evaluating Supplier Performance Using DEA and Piecewise Triangular Fuzzy AHP,” Journal of Computing and Information Science in Engineering, Transactions of the ASME, Vol. 8, 2008.<\/p>\n\n\n\n

Dean, P.R., Tu, Y.L. and Xue, D., “A Framework for Generating Product Production Information for Mass Customization,” International Journal of Advanced Manufacturing Technology, Vol. 38, Nos. 11-12, 2008, pp. 1244-1259.<\/p>\n\n\n\n

Xue, D., Cheing, S. Y., and Gu, P., “Parameter Design Considering the Impact of Design Changes on Downstream Processes Based Upon the Taguchi Method,” Journal of Engineering Design, Vol.19, No. 4, 2008, pp. 299-319.<\/p>\n\n\n\n

Hong, G., Hu, L., Xue, D., Tu, Y. L., and Xiong, Y. L., “Identification of the Optimal Product Configuration and Parameters based on Individual Customer Requirements on Performance and Costs in One-of-a-kind Production,” International Journal of Production Research, vol. 46, No. 12, 2008, pp. 3297-3366.<\/p>\n\n\n\n

Xue, D., Cheing, S. Y., and Gu, P., “Configuration Design Considering the Impact of Design Changes on Downstream Processes Based upon the Axiomatic Design Approach” Journal of Engineering Design, Vol. 17, No. 6, 2006, pp. 487-508.<\/p>\n\n\n\n

Yang, H., Xue, D., and Tu, Y. L., “Modeling of the Non-linear Relations among Different Design and Manufacturing Evaluation Measures for Multi-objective Optimal Concurrent Design” Concurrent Engineering: Research & Applications, Vol 14, No. 1, 2006, pp. 43-53.<\/p>\n\n\n\n

Xue, D., Yang, H., and Tu, Y. L., “Modeling of Evolutionary Design Database”, Journal of Computing and Information Science in Engineering, Transactions of the ASME, Vol. 6, No. 1, 2006, pp. 22-32.<\/p>\n\n\n\n

Xue, D., “Developing a Superset Language of Smalltalk for Modeling Distributed Mechanical Design Systems,” ACM SIGPLAN Notices, Vol. 41, No. 2, 2006, pp. 8-17.<\/p>\n\n\n\n

Xue, D., “A++: An Agent Oriented Programming Language,” Journal of Systemics, Cybernetics and Informatics, Vol. 2, No. 4, 2004.<\/p>\n\n\n\n

Xue, D. and Yang, H., “A Concurrent Engineering-Oriented Design Database Representation Model,” Computer-aided Design, Vol. 36, No. 10, 2004, pp. 947-965.<\/p>\n\n\n\n

Yang, H. and Xue, D., “Recent Research on Developing Web-based Manufacturing Systems: A Review,” International Journal of Production Research, Vol. 41, No. 15, 2003, pp. 3601-3629.<\/p>\n\n\n\n

Xue, D. and Xu, Y., “Web-based Distributed System and Database Modeling for Concurrent Design,” Computer-Aided Design, Vol. 35, No. 5, 2003, pp. 433-452.<\/p>\n\n\n\n

Wang, H. and Xue, D., “An Intelligent Zone-based Delivery Scheduling Approach,” Computers in Industry, Vol. 48, No. 2, 2002, pp. 109-125.<\/p>\n\n\n\n

Zhang, F. and Xue, D., “Distributed Database and Knowledge Base Modeling for Concurrent Design,” Computer-Aided Design, Vol. 34, No. 1, 2002, pp. 27-40.<\/p>\n\n\n\n

Zhang, F. and Xue, D., “Optimal Concurrent Design Based upon Distributed Product Development Life-cycle Modeling,” Robotics and Computer Integrated Manufacturing, Vol. 17, No. 6, 2001, pp. 469-486.<\/p>\n\n\n\n

Sun, J. and Xue, D., “A Dynamic Reactive Scheduling Mechanism for Responding to Changes of Production Orders and Manufacturing Resources,” Computers in Industry, Vol. 46, No. 2, 2001, pp. 189-207.<\/p>\n\n\n\n

Xue, D., Sun, J., and Norrie, D. H., “An Intelligent Optimal Production Scheduling Approach Using Constraint-based Search and Agent-based Collaboration,” Computers in Industry, Vol. 46, No. 2, 2001, pp. 209-231.<\/p>\n\n\n\n

Xue, D., Wang, H., and Norrie, D. H., “A Fuzzy Mathematics-based Optimal Delivery Scheduling Approach,” Computers in Industry, Vol. 45, No. 3, 2001, pp. 245-259.<\/p>\n\n\n\n

Xue, D. and Dong, Z., “An Intelligent Contraflow Control Method for Real-time, Optimal Traffic Scheduling Using Artificial Neural Network, Fuzzy Pattern Recognition, and Optimization,” IEEE Transactions on Control Systems Technology, Vol. 8, No. 1, 2000, pp. 183-191.<\/p>\n\n\n\n

Xue, D., “Developing a Superset of Smalltalk for Modeling Mechanical Systems,” Journal of Object-oriented Programming, Vol. 13, No. 5, 2000, pp. 12-17.<\/p>\n\n\n\n

Yadav, S., Xu, Y., and Xue, D., “A Multi-level Heuristic Search Algorithm for Production Scheduling,” International Journal of Production Research, Vol. 38, No. 12, 2000, pp. 2761-2785.<\/p>\n\n\n\n

Sun, J., Kalenchuk, D. K., Xue, D., and Gu, P., “Design Candidate Identification Using Neural Network-Based Fuzzy Reasoning,” Robotics and Computer Integrated Manufacturing, Vol. 16, No. 5, 2000, pp. 383-396.<\/p>\n\n\n\n

Xue, D., Yadav, S., and Norrie, D. H., “Knowledge Base and Database Representation for Intelligent Concurrent Design,” Computer-Aided Design, Vol. 31, No. 2, 1999, pp. 131-145.<\/p>\n\n\n\n

Xue, D. and Dong, Z., “Optimal Fuel Cell System Design Considering Functional Performance and Production Costs,” Journal of Power Sources , Vol. 76, No. 1, 1998, pp. 69-80.<\/p>\n\n\n\n

Xue, D., “A Multi-level Optimization Approach Considering Product Realization Process Alternatives and Parameters for Improving Manufacturability,” Journal of Manufacturing Systems, Vol. 16, No. 5, 1997, pp. 337-351.<\/p>\n\n\n\n

Xue, D. and Dong, Z., “Coding and Clustering of Design and Manufacturing Features for Concurrent Design,” Computers in Industry, Vol. 34, No. 1, 1997, pp. 139-153.<\/p>\n\n\n\n

Xue, D., Rousseau, J. H., and Dong, Z., “Joint Optimization of Performance and Cost in Integrated Concurrent Design: The Tolerance Synthesis Part,” Journal of Engineering Design and Automation, Vol. 2, No. 1, 1996, pp. 73-89.<\/p>\n\n\n\n

Xue, D., “An Experience of Representing Knowledge and Data in Mechanical Design Using Smalltalk-80,” OOPS Messenger, ACM Press, Vol. 5, No. 3, 1994, pp. 37-46.<\/p>\n\n\n\n

Xue, D. and Dong, Z., “Developing a Quantitative Intelligent System for Implementing Concurrent Engineering Design,” Journal of Intelligent Manufacturing, Vol. 5, No. 4 1994, pp. 251-267.<\/p>\n\n\n\n

Dong, Z., Hu, W., and Xue, D., “New Production Cost-Tolerance Models for Tolerance Synthesis,” Journal of Engineering for Industry, Transaction of ASME, Vol. 116, No. 2, 1994, pp. 199-206.<\/p>\n\n\n\n

Xue, D. and Dong, Z., “Feature Modeling Incorporating Tolerance and Production Process for Concurrent Design,” Concurrent Engineering: Research & Applications, Vol. 1, No. 2, 1993, pp. 107-116.<\/p>\n\n\n\n

Tomiyama, T., Kiriyama, T., Takeda, H., Xue, D., and Yoshikawa, H., “Metamodel: A Key to Intelligent CAD Systems,” Research in Engineering Design, Vol. 1, No. 1, 1989, pp. 19-34.<\/p>\n","protected":false},"excerpt":{"rendered":"

Saad, M. and Xue, D., \u201cEvaluation of General Product Adaptability for Adaptable Product Design,\u201d Journal of Mechanical Design, ASME Transactions, … <\/p>\n","protected":false},"author":601,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"ngg_post_thumbnail":0,"footnotes":""},"class_list":["post-171","page","type-page","status-publish","hentry"],"featured_image_src":null,"featured_image_src_square":null,"_links":{"self":[{"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/pages\/171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/users\/601"}],"replies":[{"embeddable":true,"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/comments?post=171"}],"version-history":[{"count":6,"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/pages\/171\/revisions"}],"predecessor-version":[{"id":219,"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/pages\/171\/revisions\/219"}],"wp:attachment":[{"href":"https:\/\/wpsites.ucalgary.ca\/intelligent-design\/wp-json\/wp\/v2\/media?parent=171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}